Stat 1000: Tips for Assignment 1

Published: Sat, 09/22/12

You are receiving this email because you indicated when you signed up for Grant's Free Homework Help that you are taking Stat 1000 this term. If in fact, you do not want to receive tips for Stat 1000, please reply to this email and let me know.

Please note that my first midterm exam prep seminar for Stat 1000 will be on Saturday, Oct. 6, in room 100 St. Paul's College, from 9 am to 9 pm . I am not ready to take registrations yet, but I just wanted to give you a heads-up in case you need to make arrangements to come. I will contact you later on when I am ready to take registrations.

If you ever want to look back over a previous tip I have sent, do note that all my tips can be found in my archive. Click this link to go straight to my archive:

Grant's Homework Help Archive

Did you miss my Tips on How to Do Well in this Course? Click here

Did you miss my Tips on what kind of calculator you should get? Click here

If you are taking the course by Distance/Online (Sections D01, D02, etc.), click here for my tips for your Assignment 1.

If you are taking the course by classroom lecture (Sections A01, A02, etc.), click here for my tips for your Assignment 1.

Tips for Assignment 1 (Sections A01, A02, etc.)

Study Lesson 1 in my study book (if you have it) to learn the concepts involved in Assignment 1.

For the JMP 10 part of the assignment, here are some tips:

If you have not done so already, you need to download JMP to your computer. Here is the direct link where you can get it (you need to know your UMNET ID and password):

https://www.stats.umanitoba.ca/download/jmp

Once you have installed JMP 10 and opened it, you are shown a menu with various buttons to click. You will almost always click "New Data Table" to enter new data. That is the icon on the far left of the top toolbar (it looks like a tiny little spreadsheet with a yellow star, point your mouse at it and you should see the label "New Data Table" pop up.

In the rare event they have given you a JMP file with the data already entered in it, you will simply open that file which would probably already open JMP for you. Just click the "Open" icon on the same toolbar as the "New Data Table" icon, or, if you already see the file in the "Recent Files" screen, simply double-click that. If you happen to enter data in yourself and save the file (a good idea), you can select "Open" to open up the saved file.

Question 1 is a good overview of types of variables as taught at the start of my Lesson 1.

Question 2 deals with some aspects of quantitative distributions. Remember that a frequency table is a precursor to a histogram. Visualize the histogram (don't actually make a histogram, just picture it) to help answer the questions. Remember, quartiles break the data up into 25% sections.

Question 3 requires the use of JMP.

I assume they do not want you to use JMP for the stemplot in part (a). Note that you are making the stemplot for the POINTS, not the games. You can just type the stemplot directly into the textbox they provide. Use the vertical line on your computer keyboard to separate the stem from the leaves ("SHIFT \" will give you " | "). Don't worry if your columns don't end up perfectly lined up, just do the best you can. Be sure to label the first line in your stemplot "Stem | Leaf", then enter all the stems and leaves row-by-row underneath. Don't forget to comment on the shape of the distribution (peaks, symmetric, left-skewed, right-skewed, outliers.)

If you want to make sure your stemplot looks prettier, you could also make the stemplot in your word processing program (such as Word), using the method I outline above, and using spaces or tabs to make sure everything lines up nicely. Don't forget to write in your comment on the shape, too. Then save the file as a PDF and upload it into the textbox.

To make the histogram in part (b):

First, enter the data into JMP manually: Click the "New Data Table" icon on the toolbar at top left in the JMP home screen. You are automatically taken to an empty spreadsheet with one column. Double-click "Column 1" and change its name to "Game", or right-click "Column 1" and select "Column Info" and type in the name "Game" and click OK. You will need to make a second column, too. Double-click the region to the right of your "Game" column at the top to create "Column 2". Double-click "Column 2" and rename it "Points" or right-click "Column 2" and select Column Info and rename it "Points."

Now just type in the various games and points for each game into the appropriate cells column using your "Tab" or down arrow button to move to each proceeding cell. You can also hit "Enter" after each piece of data to enter it and move to the next cell. I suggest you enter like this:

Type in "1" in row 1 of the Game column to represent Game 1, press "Tab" to be automatically moved into the "Points" column. Type in the points scored in Game 1. Press "Tab" again to be automatically moved to row 2 in the Game column. Continue typing in the data, pressing "Tab" to move from cell to cell.

Once you have entered all the data down your columns, you are ready to make your histogram. In the toolbar at the top, select Analyze then select Distribution. In the "Select Columns" part of the pop-up window, click the column you want the histogram for ("Points" in this case) to highlight it, and click the Y, Columns button. You should see the "Points" column appear in the section to the right of the "Y, Columns" button. Click OK.

It now opens yet another pop-up window called "Distributions" where your histogram should appear. Your histogram appears sideways. They want to see it the typical way, so click the red triangle next to "Points" above the histogram and select Histogram Options from the drop-down menu. Deselect "Vertical" and it will turn it the proper way.

Now, move your cursor below the horizontal axis of the histogram and double-click to see a pop-up window titled "X Axis Specification". In the box labeled "Maximum," type in "130." In the box labeled "Increments," type in "10." In the box labeled "# Minor Ticks", type 0, then click OK. (You should now see a histogram with a scale counting by tens, each bar is ten units wide (one bar will be from 80 to 90 for example), and the scale counts up to 130. The minor ticks subdivide the bars in your histogram; for example, if you set the number of minor ticks as "1", you will see one tick between each ten on the scale (i.e. the scale would now go by fives; if you set the number of minor ticks as "2", you will get 2 ticks between each ten on the scale.)

If you want to hide all the other parts of the output (but they said you don't have to), click that same red triangle again and deselect "Outlier Box Plot" and anything else that has a check mark next to it. Click the red triangle again, select "Display Options" and deselect "Quantiles" and "Summary Statistics" to make those parts disappear. Conversely, you can make the Quantiles and Summary Statistics disappear if you simply click the gray triangles (to the left of the red triangles) next to their title bars. Click the gray triangles again to make them reappear.

Press "Alt" on your keyboard or click the thin blue line that is near the top of the window to get the toolbar icons to appear. Select "File" then "Save As" to get a pop-up window. Type in whatever name you want the file to have in the "File name" section. Click the "Browse Folders" arrow and select which folder you want to save the file in (I suggest you select "Desktop" so that the file will just appear write on your desktop home screen. Finally, click the drop down arrow in the "Save as type" section and select "PDF File". Click "Save". You should now have your file ready to upload into the assignment.

To upload your file into the text box they provide: Click "HTML editor" below the text box to make a toolbar appear in the text box. Click the toolbar option called "Link" and select "Website/Uploaded File." In the pop-up window that appears, click the button called "Find/Upload File" (it is at the bottom of the pop-up window, you may have to enlarge the box or scroll down to see it). Click the "Browse" button and find the histogram file you just saved. Either double-click that file or select it and click "Open" and you should see the path to that file appear in the Browse box. Click "Upload File" and its name should appear in the "Uploaded Files" pop-up window. Select the file in the list of "Uploaded Files" to highlight it and click OK and you should see the file appear in the text box.

Question 3, part (c). To make a Time Series or Time Plot: First, return to your data table where you entered in the Game and Points data for part (b). You should see the data file in the "Window List" on the right in the JMP home screen. Double-click the name of the file (perhaps it is called "Untitled" if you never saved it) to open up the data table.

You are now ready to make the time series. Select Analyze in the toolbar, then select Modeling in the drop-down list and finally select time series. Select your time variable "Game" and click "X, Time ID" and select your variable you are tracking "Points" and click "Y, Time Series". Click OK. Just ignore that other pop-up menu asking about time lags or autocorrelations or whatever, click OK and move on. None of that has anything to do with the time series.

You should now be looking at your Time Series with "Game" on the horizontal axis and "Points" on the vertical axis. Click the red triangle next to "Time Series Points" and deselect "Autocorrelation" and "Partial Autocorrelation" to remove those parts of the output. Click the red triangle again, select "Graph" then deselect "Mean Line". That removes the horizontal line in your time series showing the mean points score.

They also ask you to describe the overall trend. You could just type your description into the text box they provide after you have uploaded the time series file. Alternatively, you can do this by adding a note to the graph itself. Press "Alt" on your keyboard, or click the thin blue line near the top of the window that has the time series to reveal the toolbar. Select the "Annotate" icon (it looks like a little white notecard with a blue "T" on it and is near the right end of the toolbar). Click a nice empty space in the output window below the time series and drag to make yourself a nice big box to type in your comments, being careful not to place the box anywhere it will block out your graphs. Describe the trend you see. One or two sentences is sufficient. If the trend is consistent, say so. If there is a change in the trend, say so, and indicate where the change occurred. (I am not saying there is a change. I have no idea, I haven't made the graph.)

Question 4 is to be done by hand. Note that part (b) wants you to mis-read the skew or symmetry by looking at the whiskers' full length, regardless if there are outliers or not. They give you the chance to properly describe the shape later, after you have done a modified boxplot.

Question 5 uses the Oscar Winners data. First click the "Resources" tab and click the Oscar Winners jmp file to open the data directly in JMP. Alternatively, you can download the file to your computer as they instruct if you wish to save the file and open it with JMP later.

Once you have opened the Oscar Winners file in JMP, first make sure the variables are correctly formatted. Select the "Award" column and right-click to get the menu and select "Column Info". The Data Type should be Character and the Modeling Type should be Nominal. If that is not correct, fix that in the drop-down menus. Select the "Age" column and right-click to get the menu and select "Column Info". The Data Type should be Numeric and the Modeling Type should be Continuous. If that is not correct, fix that in the drop-down menus.

To make the side-by-side boxplots: Select "Analyze" then "Fit Y By X". Highlight "Age" and click "Y, Response". Highlight "Award" and click "X, Factor". Click OK. This should open a pop-up window with a bunch of dots arranged vertically on a graph for "Actor" and "Actress". If that does not happen, you probably did not follow my instructions above to make sure the "Award" column is Character and Nominal. In that case, close the window and make the appropriate adjustments in your data table.

Now click the red triangle next to "Oneway Analysis ..." and select "Quantiles." Your side-by-side box plots should appear on the graph as well as a Quantiles output below that shows you the five-number summary among other things. Click the red triangle again and select "Display Options" (down near the bottom of the menu), then deselect "Grand Mean" to get rid of the horizontal line in the graph showing the mean age of all the performers. Click the red triangle once more, select Display Options again, and select "Points Jittered" to spread out the data points on the graph so you can identify all the data points.

You should be able to see the outliers on the graph. As they suggest, you can click a point that is an outlier and then return to the Oscar Winners data table (in the Window List of the JMP home screen) and scroll down the table to see the corresponding performer highlighted. Alternatively, you can sort the data in the spread sheet by age. In the data table screen, select "Tables" in the toolbar and select "Sort". Highlight "Age" and click "By" and click OK. You are now given a new data table with the performers sorted in order of ascending age. You can now easily read of the performers with an outlying age (either much younger or much older than the others).

They ask you to compare the distributions according to shape, centre and spread and identify the outliers. You could just type your comments into the text box they provide after you have uploaded the time series file. Alternatively, you can do this by adding a note to the graph itself. Press "Alt" on your keyboard, or click the thin blue line near the top of the window that has the side-by-side boxplots to reveal the toolbar. Select the "Annotate" icon (it looks like a little white notecard with a blue "T" on it and is near the right end of the toolbar). Click a nice empty space in the output window below the quantiles and drag to make yourself a nice big box to type in your comments, being careful not to place the box anywhere it will block out your graphs. Answer their question. One or two sentences is sufficient. Don't forget to identify the actors or actresses whose ages are outliers.

Question 6 should be done by hand (i.e. with your calculator, not with JMP). Use the Stat Mode on your calculator to compute the Mean and Standard Deviation. Check the Appendix at the back of my book to learn how to use the Stat Mode on your calculator. Here is a link to a digital copy of that appendix:

Grant's Tutoring Basic Stats 1, Appendix A: Calculators

Note that part (c) in question 6 is introducing a key concept about changing the units in data. Be sure to read the "Effect of Changing Units on Centre and Spread" section of my book in Lesson 1 and see questions 17 and 18 for examples. Questions 19 and 20 in my book should help you with parts (d) and (e). When they ask what happens to the standard deviation in part (e), ask yourself, did that eighth value increase the spread in the scores? or, did it decrease the spread from the mean? Before you answer that question, use your calculator to find the new standard deviation and see if your logic was correct.

Question 7: First, you need to know the scores attached to each letter grade. An A+ is 4.5, A is 4, B+ is 3.5, B is 3, etc. To compute your grade point average:

First, make a new column where you multiply each grade score by the number of credit hours. For example, if you got a B+ in a 3 credit-hour course, you would multiply 3.5 by 3 to get 10.5 in this new column. Find the total of this new column and find the total number of credit hours. Divide the total of the new column by the total number of credit hours to get the GPA. Put another way, if you got a B+ in 3 credit-hour course, it is as though you scored 3.5 three separate times. You could put your calculator in Stat Mode, and enter 3.5 in three separate times. If you got an A in a 6 credit-hour course, you got 4.0 six times. Enter 4.0 six separate times. After you have entered all the data, your calculator will tell you the mean (your GPA).

Tips for Assignment 1 (Distance/Online Sections D01, D02, etc.)

Study Lesson 1 in my study book (if you have it) to learn the concepts involved in Assignment 1. This lesson will also set you up for Assignment 2.

Never use JMP to answer a question unless they specifically tell you to. Whenever they do tell you to use JMP, never go out of your way to click red triangles to add things to the graph (like put titles on histograms, or label axes). Whatever JMP gives by default is all they require unless they specifically request you add something to the output or remove something from it. Of course, I will always give you specific steps to add/remove anything they do require.

In the questions asking you what you are or are not allowed in exams, please note that a "slide rule" is just an ancient type of pathetic calculator. If you are allowed a calculator, you are allowed a slide rule (but, then again, if you use a slide rule, you probably still use clay tablets to write on).

Anytime a question wants you to "fill in the blanks" with key vocabulary terms, go to the appropriate section of your textbook (remember you have an online version of the textbook in Stats Portal if you selected the electronic option on your book list), and you will find the exact sentence they are giving you with the obvious word they want you to type in.

The question asking you what graphs to use is really asking you is the data "quantitative" or "categorical". If you are collecting two sets of quantiative data, then you would use a back-to-back stemplot or side-by-side boxplot to compare them (and no other graphs). If you are collecting quantitative data as time goes by, you would use a time series or timeplot and nothing else. By "how old are students' cars", assume you would say the cars are 0, 1, 2, 3, ... years old.

To type in the split stemplot they request, use the vertical line on your computer keyboard to separate the stem from the leaves ("SHIFT \" will give you " | "). Don't worry if your columns don't end up perfectly lined up, just do the best you can. Be sure to label the first line in your stemplot "Stem | Leaf", then enter all the stems and leaves row-by-row underneath. Don't forget to comment on the shape of the distribution (peaks, symmetric, left-skewed, right-skewed, outliers.)

Ignore any references to "Crunchit!". You are using JMP 10 in this course. The assignment is just an old assignment that they forgot to update. Use JMP 10 anytime they tell you to use computer stuff.

For the JMP 10 part of the assignment, here are some tips:

If you have not done so already, you need to download JMP to your computer. Here is the direct link where you can get it (you need to know your UMNET ID and password):

https://www.stats.umanitoba.ca/download/jmp

Question 9:

To copy and paste data into JMP: First, of course, click the hyperlink to the data they have given you. Now, select and copy the given data set. Now, open JMP and click "New Data Table". A pop-up window should appear showing a spreadsheet with one column labeled "Column 1". In the toolbar of this pop-up window select "Edit" then "Paste with Column Names". That pastes all the data in and names the column appropriately.

If you have done this correctly, you should now be looking at a column labeled "tuition" and a whole bunch of numbers representing various tuitions lined down the rows of that column.

Click the column heading "tuition" to select the column (the column name cell should be highlighted). Right-click and select "Column Info" in the menu that appears. Make sure the Data Type is Numeric and the Modeling Type is Continuous, using the drop-down menus to fix that if necessary. Click OK.

To make a histogram: In the toolbar at the top, select Analyze then select Distribution. In the "Select Columns" part of the pop-up window, click the column you want the histogram for ("tuition" in this case) to highlight it, and click the Y, Columns button. You should see the "tuition" column appear in the section to the right of the "Y, Columns" button. Click OK.

It now opens yet another pop-up window called "Distributions" where your histogram should appear. Your histogram appears sideways. If they want to see it the typical way, click the red triangle next to your variable above the histogram and select Histogram Options from the drop-down menu. Deselect "Vertical" and it will turn it the proper way. They did not request this, so you aren't obligated to do that. However, that would be a good idea if you wanted to properly read if the distribution is left-skewed, right-skewed or symmetric. But, they didn't ask you to describe the distribution.

Question 10

For the pole-vault question: You will have to enter the data manually into JMP. Click the "New Data Table" icon to get a fresh spreadsheet to enter new data.

Click the link to the wikipedia data and be sure to scroll down to the Womens' outdoor pole-vault data.

To enter data into JMP manually: Click "New Data Table" and you are automatically taken to an empty spreadsheet with one column. If you ever need two or more columns, simply double-click the space to the right of "Column 1" to create "Column 2". You can repeat this to create "Column 3", etc. You can then type in the data, using "enter" or "tab" or your arrow buttons on your keyboard to move from one cell to the next.

In this particular pole-vault question, double-click "Column 1" and name it "Year". Click OK. Double-click the space to the right of Column 1 to create Column 2. Name that column "Height". Type in the data you have been given. Only type in the years and heights, the rest of the columns given in wikipedia are irrelevant. Be sure to highlight each column and right-click and select "Column Info" like you did in question 9 and confirm that the "Data Type" is "Numeric" and the "Modeling Type" is "Continuous" for both columns.

To make a Time Series or Time Plot: Select Analyze in the toolbar, then select Modeling in the drop-down list and finally select time series. Select your time variable "year" and click "X, Time ID" and select your variable you are tracking "height" and click "Y, Time Series". Click OK. Just ignore that other pop-up menu asking about time lags or autocorrelations or whatever, click OK and move on. None of that has anything to do with the time series.